PSI

PRESS LOCK DRY GLOVE SYSTEM

​

PSI Press Locks are built for divers by divers

Over 35 years of industry experience has gone into the development of the PSI Press Locks, with input from some of the biggest names. 

 

The design was a collaborative effort from industry experts.

 

The ring system was developed to eliminate some of the current challenges divers experience with other ring systems.  After 2.5 years of research and development, this has been achieved with the PSI Press Locks.  

 

Our goal was for easy drysuit installation, seal replacement, glove replacement, and a guaranteed seal with little effort required in the use of the glove system during dives.  Based on industry feedback, the PSI Press Locks have achieved this!  

 

Press Locks are manufactured in Canada from aluminum, reducing the size of the overall system, while making the system incredibly durable for the harshest of environments.  The ring system is likely the smallest system in the industry.  

​

​It is being utilized by recreational, technical, commercial and special forces divers. 

 

The system design allows for quick and easy removal of all components. 

​

The glove to suit sealing oring, will ensure a 100% seal with little effort required when the glove is installed to the suit and removed when the dive is done.  This was achieved due to the oring size and slight turn to the left or right of the glove ring which locks the system in place.

​

The system is designed to work with the two SiTech wrist PU rings that come standard with many drysuits that are manufactured today

​

Included in the system:  

• Ring system 

• O-rings 

• Gloves (PVC or Marigold med, large, XL, XXL)

• Installation removal tool 

• PSI logo sticker 

• PSI drybag eliminating the use of single use plastics

​ 

Each PSI Press Locks are pre-assembled, inspected and tested prior to shipping, ready for use.  

 

*Any questions, reach out to your nearest dealer or contact us directly.