Analytical Industries INC O2 sensors are engineered specifically for use underwater at depth. Every O2 sensor is subjected to stringent quality assurance program that checks the output and stability of each 3-4 times during the manufacturing process. As a result, every rebreather sensor is qualified and its hyperoxic linearity documented prior to shipment.
With AII Diving Sensors you can Dive with confidence!
Certified Quality A test report accompanies every rebreather oxygen sensor shipped from the factory and is traceable to each unique serial number. It is the buyers’ certification that a particular sensor has demonstrated a stable output in air (20.9%), a linear and stable output at both 100% oxygen and when pressurized to 1.6 ATM using specialized diving sensors test equipment.
Quality Assurance Program is certified annually and complies with ISO 9001:2008 and medical device regulations in the U.S., Europe and Canada.
All-In-One Gas Detection Package For Technical Diving
A portable Trimix Analyzer designed to ensure the correct mix of helium, oxygen and nitrogen for technical diving. This easy-to-operate diving instrument automatically corrects for environmental conditions, eliminating the risk of errors from manual calculations. This will help the user to avoid nitrogen narcosis during dives down to 46 meters. It has a large backlit LCD display that is easily read even in low light conditions, and which provides additional information such as a Maximum Operating Depth calculation. These features make the Trimix 4001 one of the best nitrox analyzers on the market.
Features
-
Displays O2, He and balance gas (0-100%)
-
One touch calibration with air (O2 Span and He Zero)
-
Includes temperature, barometric pressure and RH sensors
-
Long life battery with 16 hours of use, with two-hour charge time
-
15-minute auto-off feature to save battery
-
Watertight, IP65 enclosure
The AII-3000 is a handheld oxygen analyzer that provides a very easy way to verify oxygen levels. For use in personnel safety, area monitoring, checking breathing air tanks, checking tanks intended for scuba diving, confirming O2 levels prior to welding.
AII-3000-AD and All-3000-AHCD For Oxygen Measurement in Welding and Scuba Diving
Features
-
0 to 100% O2 measurement range
-
Menu driven electronics
-
Auto Diagnostics
-
Long sensor life up to 60 months (AII-3000)(in air at 25°C and 1 atmosphere)
-
Battery life up to 1,200 hours of continuous use
-
Fast response time of T90 in <10 seconds
-
Large backlit LCD for easy viewing
​
AII-3000-MD For Oxygen Measurement in Welding and Scuba Diving
Features
-
0 to 100% O2 measurement range
-
Audible and Visual HI-LO Alarm Feature (LO 15%-99%, HI 16-100%)
-
Menu driven electronics
-
Auto Diagnostics
-
Long sensor life up to 60 months (AII-3000) (in air at 25°C and 1 atmosphere)
-
Battery life up to 1,200 hours of continuous use
-
Fast response time of T90 in <10 seconds
-
Large backlit LCD for easy viewing
The Palm CO handheld Carbon Monoxide analyzer that provides a very easy way to check carbon monoxide concentration in compressed air tanks. CO measuring range 0-25 PPM
Palm CO Handheld Monoxide Analyzer
Features
-
User friendly interface
-
One touch zero or span calibration
-
Accurate reliable results
-
No maintenance
The Palm O2, is a handheld oxygen analyzer that provide a very easy way to verify oxygen levels prior to welding or in scuba diving tanks.
Analytical Industries’ AII Palm O2 is a convenient way to check oxygen levels in welding gases. These cost-effective gas analyzers also measure and display the concentration of oxygen in compressed breathing air tanks intended for scuba diving, for personnel safety, O2 deficiency in confined spaces, as well as confirming the O2 levels prior to welding. These monitors use similar electrochemical galvanic fuel cell oxygen sensor that are extensively used to measure concentrations from 0% to 100% O2 in gas streams.
Palm O2D Handheld O2 Analyzer
Features
-
Easy user interface, one touch controls
-
Simple to use, accurate reliable results
-
One touch calibration, 100% O2 or air
-
Long battery life, 13,000 hrs of use
-
Advanced sensor technology
-
State of the art electronics
The Palm O2, is a handheld oxygen analyzer that provide a very easy way to verify oxygen levels prior to welding or in scuba diving tanks.
Analytical Industries’ AII Palm O2 is a convenient way to check oxygen levels in welding gases.
Palm O2D Remote Sensor Handheld O2 Analyzer
Features
-
Easy user interface, one touch controls
-
Simple to use, accurate reliable results
-
One touch calibration, 100% O2 or air
-
Long battery life, 13,000 hrs of use
-
Advanced sensor technology
-
State of the art electronics
